Simple and effective, September 30, 2007
Just installed one of these. No problems and works fine with my Samsung 46-inch LCD.
Instructions are clear and complete. They are generic instructions for a variety of televisions but include an 18-page list of TV models indicating exactly which of the bolts, spacers, washers, etc. are to be used with each model. Each variety and...read full review
Just installed one of these. No problems and works fine with my Samsung 46-inch LCD.
Instructions are clear and complete. They are generic instructions for a variety of televisions but include an 18-page list of TV models indicating exactly which of the bolts, spacers, washers, etc. are to be used with each model. Each variety and size of this miscellaneous hardware comes individually packaged and labeled to match the instructions.
The general idea is to attach the wall plate to the wall; attach the brackets to the TV; then hang the TV (via the brackets) on the wall plate.
A few installation hints:
1) It is a two-person job so plan on having some help. A second person is a big help when lining up the wall-plate to be sure you drill the holes so that the TV ends up level and in the position you want. And, chances are your TV is too heavy or bulky to be moved safely by one person anyway.
2) You will want to read and re-read the instructions before you start.
3) Once you have a feel for the instructions use a yellow highlighter to mark information specific to your situation and to mark the packaging for the bolts, etc. you need.
4) Use of a small mirror and flashlight can help you direct the long allen wrench to the bolts that lock the brackets to the wall plate. Holding the flashlight is another place where a second pair of hands can help.
5) Do not adjust nor lock-in the tilt until after you have connected the wires to the back of the TV. Better yet, attach them before hanging the TV onto the wall plate.
UPDATE:
I read in another review that you should have a level and a stud finder. I probably should have mentioned that in my hints above but didn't think to since I already had those things. So, I agree, you will want to use those to do the job correctly. For the stud finder, get a reasonably good one as the cheap ones are not much better than tapping on the wall and listening for the best sounding spots. I have a Zircon 60369 Studsensor I65 Onestep Center Finding Stud Finder (which I bought at Lowe's). It says "Center Finding" but what I like is the way it also identifies the edges of studs. If I can get repeatable locations on both edges and the center then I believe I have found the stud! Zircon sells more expensive models so if you have difficult walls (e.g. plywood, or plaster with lath) you may want to consider those, but this model worked fine for my typical 5/8" drywall over 2x4 studs, even with some plaster over the drywall.
Another good tip I saw was to attach the brackets to the TV first thing. This will allow you to measure more carefully exactly where you want the wall plate. Come to think of it, this is exactly what I did, but for a different reason. I wanted to be sure the brackets would fit my TV before committing myself to drilling holes in the wall!
minimize
One touch tilt???, October 11, 2007
The TV wall mount is of good quality, but it is by no means a "One Touch Tilt" model. Both of the brackets have adjustments on them and consequently they must both be adjusted in order to tilt the TV up or down. Not a bad TV mount, but it is not what I ordered. Be careful when purchasing a flat-panel TV mount. Do some research and visit the...read full review
The TV wall mount is of good quality, but it is by no means a "One Touch Tilt" model. Both of the brackets have adjustments on them and consequently they must both be adjusted in order to tilt the TV up or down. Not a bad TV mount, but it is not what I ordered. Be careful when purchasing a flat-panel TV mount. Do some research and visit the manufacurers website before choosing which model you want. After you choose the model that fits your application, go back and find it on Amazon. Do not rely on the product descriptions listed on Amazon because I have found several of them to be inaccurate. I hope this info will help others make a more educated choice when they purchase their TV wall mount brackets. minimize
Friendly Warning, October 14, 2007
Be aware that many of the mounts on Amazon are incorrectly labled for TV size. The mounting bracket for this unit is only 30" wide. The mounting holes on the back of my 47" TV are 31" apart! Therefore this unit will not work. The best bet if you want this brand is to go with tht ST670P. It's mounting bracket is 37" wide. Though I doubt it will...read full review
Be aware that many of the mounts on Amazon are incorrectly labled for TV size. The mounting bracket for this unit is only 30" wide. The mounting holes on the back of my 47" TV are 31" apart! Therefore this unit will not work. The best bet if you want this brand is to go with tht ST670P. It's mounting bracket is 37" wide. Though I doubt it will support the 73" TV it claims it should work for TV's in the 50" range.
minimize
Great product,exelent quality,love to have it !!!!!!, May 26, 2007
The wall mount arrieved via UPS ground free shipping in 4 days,it was very easy to install,had all the bolts and screws with a list of TV brands matching the bolts for your TV. THAT WAS GREAT !!Can be installed on 2 or 3 studs (32 inch appart)The instructions are clear and easy to follow. All you need is someones help to hang up the TV. Mine is a...read full review
The wall mount arrieved via UPS ground free shipping in 4 days,it was very easy to install,had all the bolts and screws with a list of TV brands matching the bolts for your TV. THAT WAS GREAT !!Can be installed on 2 or 3 studs (32 inch appart)The instructions are clear and easy to follow. All you need is someones help to hang up the TV. Mine is a 50'MAXENT HD PLASMA,125 pounds.Before I installed it I tested the wall mount by hanging myself on it(165pounds),I mounted it on 2 studs with the 4 lag bolts provided and I was a little sceptical,but it passed my test and with the help of my wife Naomi,we hung up the TV and we love how it looks.Also if you have it mounted higher on the wall, the tilt feature is very handy and the mount comes with a long "L" shaped wrench to access behind the TV for tilt adjustments.Before I tried more expensive wall mounts but this one has the same or better quality and definetly better design and features. I RECOMEND IT FOR ALL FLAT SCREEN TV OWNERS WHO WANT TO HANG SAFELY THEIR TVS AND LOOK GOOD.(AND THEIR WALLET TOO)!!!!!! minimize
Easy to install, July 21, 2007
Installed easily. Fit perfrectly for a 50" plasma. Tilt function is really nice if you need to add cables to the back of the TV.
